Back Panel - Belkin F9J1102 User Manual

GettinG to Know Your router

Back Panel

A
B
C
D
A) ADSL Connector
Connect your Router to a
phone jack using a telephone
cord. In some areas, a
microfilter might be required.
B) wired (LAn) Connectors
Connect computers and other
wired network devices to these
ports using Ethernet cables.
C) uSB Port
USB printers, disks, and other
USB devices plugged into this
port will be shared on your
network. Each USB port has a
light that indicates its status.
off: No USB device is
connected or the attached
USB device is not in use.
Blinking: Please wait to
unplug the device until
the light turns off.
on: The USB device is
connected and being
shared on your network.
17
D) reset Button
This button is used to restart
your Router in rare cases when it
functions incorrectly. Resetting
the Router will preserve your
settings. This button may also
be used to restore the factory
default settings. Please see
the Troubleshooting section
for more information.
e) Power Connector
Connect the included power
supply to this jack.