Table of Contents
Advertisement
142 Getting Connected
2.
Click Start > All Programs > Settings > Connections.
3.
Click Bluetooth > Add new device.
4.
Select the name of the Bluetooth headset, then click Next. The phone will
automatically pair with the Bluetooth headset.
Windows Mobile will automatically try one of the preconfigured passcodes (0000,
1111, 8888, 1234) to pair the Bluetooth headset with the phone. If this fails, you
have to enter the passcode delivered with your headset manually.
Note
If the Bluetooth stereo headset becomes disconnected, turn the headset on and
repeat steps 1 to 3 above. Select the stereo headset and click Menu > Set as Wireless
Stereo.
Beam information using Bluetooth
You can beam information, such as contacts, calendar items, and tasks, as well as
files from your phone to your computer or to another Bluetooth-enabled device.
Notes
• If your computer does not have built-in Bluetooth capabilities, you need to
connect and use a Bluetooth adapter or dongle on your computer.
• Before beaming items to your computer, open Bluetooth Configuration or
Bluetooth Settings in the Control Panel and check if there's an option for setting a
location for saving beamed items.
To beam information from your phone to a computer
1.
Set Bluetooth on your phone to visible mode. For information about this, see
"To make your phone visible".
2.
Next, set Bluetooth on your computer to visible mode, create a Bluetooth
partnership, then enable your computer to receive Bluetooth beams.
If your computer has Windows Vista or Windows XP SP2 and your computer's
Bluetooth adapter is supported by your Windows version, do the following
steps:
a.
On your computer, open Bluetooth Devices from the Control Panel then
click the Options tab.
Advertisement
Table of Contents
