Samsung MIM-B18 User Manual page 26

Control and Monitoring (Continued)
26
E-
Set lower temperature limit by pressing [∧] and [∨].
4
 You can set lower temperature limit by checking 'Apply'.
 When indoor unit is operating in cool mode, DMS2
controls indoor unit as lower temperature limit if the
desired temperature is lower than lower temperature limit.
 Lower temperature limit can be set in the range of
18℃(65°F)~30℃(86°F).
 Check 'Apply' to apply the Lower temperature limit setting.
 When indoor unit is operating in Cool or Dry mode and
the low temperature limit is applied, you cannot set the
desired temperature lower than the lower temperature
limit.
Set upper temperature limit by pressing [∧] and [∨].
5
 Check 'Apply' to apply the upper temperature limit setting.
 When indoor unit is operating in heat mode, DMS2
controls indoor unit as upper temperature limit if the
desired temperature is higher than upper temperature
limit.
 Upper temperature limit can be set in the range of
16℃(61°F)~30℃(86°F).
 Check 'Apply' to apply the lower temperature limit setting.
 When indoor unit is operating in Heat mode and the
upper temperature limit is applied, you cannot set the
desired temperature higher than the upper temperature
limit.
Note   T emperature limit in Cool/Heat mode setting is not
available in ERV.
  I f the indoor unit is in Auto(Cool)/Auto(Heat) mode,
lower/upper temperature limit will be applied when
the indoor unit is operating in Auto mode.
However, if the upper temperature limit is set to
16°C(61°F)~17°C(64°F), the upper temperature limit in
Auto(Heat) mode is 18°C(65°F).