Control and Monitoring (Continued)
22
E-
8
Select the air flow.
You can select Vertical, Horizontal, All and None air flow.
9
Set remote controller settings.
You can select ON, OFF and Level1.
When selecting [OFF], indoor unit control by wired/
wireless remote controller and indoor unit panel is not
possible. Indoor unit control is only available in DMS2 web
page.
Click [ON] when you want to use wired remote controller
in each room.
Note
W hen filter warning sign is displayed on indoor unit
status window
Select the indoor unit and click [Reset filter].
Filter warning will be released.
Make sure that each indoor unit must be turned on to
control.
Selecting remote controller, reset filter, operation
mode limits, setting lower/upper temperature limit are
possible even if the power of indoor unit is off.
Some air flow option may be restricted depending on
the indoor unit model.