Selecting The Cool Mode - Samsung MWR-SH00 User Manual

Wired remote control for air conditioner
Hide thumbs Also See for MWR-SH00:
Table of Contents

Advertisement

Selecting the Cool Mode

Select the Cool mode to lower the room temperature.
1
Press the
(ON/OFF) button to turn on the indoor unit.
(Do not press the
control is on).
Result:
 T he air conditioner will be turned on with the
mode selected when the unit was last used.
Caution
The air conditioner has a built-in protection
mechanism to prevent the unit from being
damaged when it is started immediately after
being:
 Plugged in
 Stopped
The air conditioner will start up after 3 minutes.
2
To select the Cool mode, press the
displayed on the remote control.
Result:
The air conditioner will run in Cool mode.
3
To adjust the temperature, press the
the desired temperature.
The temperature can be set between 18°C(65°F) and
30°C(86°F).
Result:
 The temperature is adjusted by 1°C(1°F) when
the
 The air conditioner will start cooling if
the temperature set is lower than the room
temperature.
 The fan will run even if the temperature set is
higher than the room temperature.
4
To adjust the fan speed, refer to page 11.
Note
The Cool and Heat mode cannot be selected at
the same time.
(ON/OFF) button if the remote
button until
buttons to set
buttons are pressed.
is
7
E-

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents