Wired Network Setup - Samsung ML-2950ND User Manual

Wired network setup

You must set up the network protocols on your machine to use it on
your network.
You can use network after connecting network cable to a
corresponding port on your machine.
• For models that do not have the display screen on the control
panel, use the SyncThru™ Web Service or SetIP program.
- See "Using SyncThru™ Web Service" on page 61.
- See "Setting IP address" on page 13.
• For models that have the display screen on the control panel,
configure the network setting by pressing
Network on the control panel.
4
Printing a network configuration report
You can print Network Configuration Report from the machine's
control panel that will show the current machine's network settings.
This will help you to set up a network.
• The machine has the display screen: Press the
button on the control panel and select Network > Network
Config. (Network Configuration)> Yes.
• The machine does not have the display screen: Press the
(Cancel or Stop/Clear) button for more than five seconds on the
control panel.
Using this Network Configuration Report, you can find your
machine's MAC address and IP address.
For example:
• MAC Address: 00:15:99:41:A2:78
• IP Address: 192.0.0.192
5
First, you have to set up an IP address for network printing and
(Menu) button >
managements. In most cases a new IP address will be automatically
assigned by a DHCP (Dynamic Host Configuration Protocol) server
located on the network.
IPv4 configuration using SetIP (Windows)
Before using the SetIP program, disable the computer firewall from
Control Panel > Security Center > Windows Firewall.
(Menu)
2. Using a network-connected machine
Setting IP address
The following instructions may differ for your model.
13