Samsung ML-2950ND User Manual page 136

Wireless network setup
7
Click Continue.
8
Read the license agreement and click Continue.
9
Click Agree to agree to the license agreement.
10
When the message that warns that all applications will close
on your computer appears, click Continue.
11
Select the Wireless Network Setting.
12
The software searches the wireless network.
If the search has failed, you may check if the USB cable is
connected between the computer and machine properly,
and follow the instructions in the window.
13
After searching, the window shows the wireless network
devices. Select the name (SSID) of the access point you are
using and click Next.
2. Using a network-connected machine
When you set the wireless configuration manually, click
Advanced Setting.
• Enter the wireless Network Name: Enter the SSID of the
access point you want with (SSID is case-sensitive).
• Operation Mode: Select Infrastructure.
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption
may or may not be used, depending on the need for data
security.
Shared Key: Authentication is used. A device that has a
proper WEP key can access the network.
WPA Personal or WPA2 Personal: Select this option to
authenticate the print server based on WPA Pre-Shared
Key. This uses a shared secret key (generally called Pre-
Shared Key pass phrase) that is manually configured on
the access point and each of its clients.
• Encryption: Select the encryption. (None, WEP64,
WEP128, TKIP, AES, TKIP, AES)
• Network Key: Enter the encryption network key value.
• Confirm Network Key: Confirm the encryption network
key value.
• WEP Key Index: If you are using WEP Encryption, select
the appropriate WEP Key Index.
46