Wired Network Setup - Samsung ProXpress M4530ND User Manual

Wired network setup

4
Printing a network configuration report
You can print Network Configuration Report from the machine's control panel
that will show the current machine's network settings. This will help you to set
up a network.
Touch (Setup) on the touch screen and select Network > Network
Configuration.
• The machine has a display screen: Press the Menu(
control panel and select Network > Network Configuration.
• The machine has a touch screen: Press the
screen and select Network > Network Configuration.
Using this Network Configuration Report, you can find your machine's MAC
address and IP address.
For example:
•
•
5
Setting IP address
First, you have to set up an IP address for network printing and management. In
most cases a new IP address will be automatically assigned by a DHCP (Dynamic
Host Configuration Protocol) server located on the network.
IPv4 configuration using SetIP (Windows)
) button on the
Before using the SetIP program, disable the computer firewall from Control
Panel > Security Center > Windows Firewall.
(Setup) on the touch
MAC Address: 00:15:99:41:A2:78
IP Address: 169.254.192.192
• The machine that does not support the network interface, it will not be
able to use this feature (see "Rear view" on page 18).
• TCP/IPv6 is not supported by this program.
The following instructions may differ for your model.
2. Using a Network-Connected Machine
139