Wired Network Setup - Samsung Xpress SL-M2835DW/XAA User Manual

Wired network setup

You must set up the network protocols on your machine to use it on your
network.
You can use network after connecting network cable to a corresponding port on
your machine.
For models that do not have the display screen on the control panel, use the
SyncThru™ Web Service or SetIP program.
• See "Using SyncThru™ Web Service" on page 183.
• See "Setting IP address" on page 104.
4
Printing a network configuration report
You can print Network Configuration Report from the machine's control panel
that will show the current machine's network settings. This will help you to set
up a network.
Press the (Cancel) button for more than 4 seconds on the control panel.
Using this Network Configuration Report, you can find your machine's MAC
address and IP address.
For example:
• MAC Address: 00:15:99:41:A2:78
• IP Address: 192.0.0.192
5
Setting IP address
First, you have to set up an IP address for network printing and managements.
In most cases a new IP address will be automatically assigned by a DHCP
(Dynamic Host Configuration Protocol) server located on the network.
IPv4 configuration using SetIP (Windows)
Before using the SetIP program, disable the computer firewall from Control
Panel > Security Center > Windows Firewall.
The following instructions may differ for your model.
2. Using a Network-Connected Machine
104