Table of Contents
Advertisement
Grill Body
Assembly
M6 X12 mm
Bolts
M6 Flat
Washers
M6 Nuts
Left Front Leg
(with Axle Holes)
Wheel
M12 Nut
Grill Body
Assembly
Bottom View
Left Rear Leg
(with Axle Holes)
Bottom Shelf
Wheel Axle
Step 4
Attach the left front and rear legs (with
wheel axle holes) to the grill body
assembly. First, insert the bottom shelf
into the left rear leg, then move bolted
end of leg until bolts align with holes
in the grill body assembly. Attach using
four M6 X12 mm bolts, M6 flat washers
and M6 nuts. Hand tighten only. Repeat
this step for left front leg. Tighten all
bolts and nuts for each leg attached to
the grill body assembly.
Step 5
Insert wheel axle through left front
and rear legs and attach wheels using
two M12 nuts as illustrated. Tighten
securely.
Note:
With the help of a friend, lift
the grill body assembly to an
upright position. Try to minimize
the stress to the legs.
CAUTION:
Keep lid closed when
setting unit upright to
prevent bodily injury.
6
Advertisement
Table of Contents
