Changing The Bulb - Rangemaster RMB9048BL/SS User Manual & Installation & Service Instructions

Fig. 7.5
ArtNo.324-0005 Oven light bulb

Changing the bulb

Oven light
Fig. 7.5
You can buy a replacement bulb (which is not covered under
the warranty) from a good electrical shop. Ask for a 15 W
– 230 V lamp, FOR OVENS. It must be a special bulb, heat
resistant to 300 °C.
1.
Turn off the power at the circuit breaker.
2.
Before removing the existing bulb, turn off the power
supply and make sure that the oven is cool. Open the
oven door and remove the oven shelves.
3.
Unscrew the protective cover by turning counter-
clockwise. It may be very stiff. We recommend that you
wash and dry the glass cover at this point.
4.
Carefully unscrew the old bulb and insert the new bulb.
5. Screw back the bulb cover. Turn on the circuit breaker
and check that the bulb now lights. Refit the protective
cover.
NEVER use screwdrivers or other utensils to remove
n
the light cover. This could damage the enamel of the
oven or the lamp holder.
Remove only by hand.
n
Never replace the bulb with bare hands as
n
contamination from your fingers can cause
premature failure. Always use a clean cloth or
gloves.
Please note: The bulb replacement is not covered by
n
your guarantee.
14