Contents Before You Start... Troubleshooting Installation and Maintenance Installation Electrical Safety Dear Installer Before First Use Location of the Oven Personal Safety Positioning the Oven Cleaning Provision for Ventilation Oven Overview Electrical Connection Levelling the appliance Function Overview Customer Care Programming Overview 10.
Before You Start... • Before electrical reconnection, check that the appliance Thank you for buying a Rangemaster appliance. It should give you many years trouble-free cooking if installed and operated is electrically safe. correctly. It is important that you read this section before you The appliance should be powered down before start.
Cooking high moisture content foods can create a Fig. 1.1 ‘steam burst’ when the oven door is opened. When opening the oven stand well back and allow any steam to disperse (Fig. 1.1). When the oven is on, DO NOT leave the oven door open for longer than necessary.
Oven Overview Fig. 2.1 ArtNo.325-0011 - BI oven R6012 Key: Fig. 2.1 Checking the Parts 3 buttons, clock and Oven Light The oven is supplied with the following parts: function display Grill • 1x Handle Retractable Fanned Grill • 2x Shelf temperature and Bake (Fan) function knobs...
Function Overview No Function Mode Selected Oven Light The oven light will operate on all selected function. This function radiates the heat from the grill element and the top element. This fully Grill temperature variable grill is ideal for grilling a family meal. This function uses the fan to circulate the heat from the grill element around the Fan Grill (Fanned Grill) food.
Programming Overview Oven Shelf levels Fig. 4.1 Always count shelf levels from the bottom upwards (Fig. 4.1) When correctly installed, your product will meet all safety requirements laid down for this type of product. However, special care should be taken around the rear or the underneath of the appliance as these areas are not designed or intended to be touched and may contain sharp or rough edges that...
Setting the time Changing the time Once the appliance is connected and switched on, the display If the clock time needs to be reset or adjusted, please follow will start to flash. The clock must be set to the time of day the procedure below.
Setting the minute minder The minute minder can be used when the oven is switched on or off. It can be set for up to 23 hours and 59 minutes. Step 1. Press “Menu” button 3x until the minute minder indicator flashes.
Setting the Semi-automatic cooking on the lower oven The lower oven can be set to switch off automatically with a preset time of 10 hours. Step 1. Select the function and temperature for the oven Step 6. To view how many minutes are left in the cooking (the oven will switch on).
Setting the Automatic cooking on the lower oven (Delayed Start) The lower oven can be set to switch off automatically with a preset time of 10 hours. Step 6. Calculate the time for the cooking to finish. Press Step 1. Select the function and temperature for the oven the “+”...
Cooking Tips Tips on Cooking with the Timer General Oven Tips If you want to cook more than one dish, choose dishes that The wire shelves should always be pushed firmly to the back require approximately the same cooking time. However, of the oven.
Cooking Table The oven control settings and cooking times given in the table below are intended to be used Top (T) AS A GUIDE ONLY. Individual tastes may require the temperature to be altered to provide a preferred result. ArtNo.050-0007 Centre (C) Oven shelf positions Food is cooked at lower temperature in a fan oven than in a conventional oven.
Cleaning Your Oven Essential Information Fig. 7.1 Allow the oven to cool and isolate the electricity supply before carrying out any thorough cleaning and maintenance. Never use paint solvents, washing soda, caustic ArtNo.325-0001 - BI oven door hinges cleaners, biological powders, bleach, chlorine based bleach cleaners, coarse abrasives or salt.
Removing the glass from the door Fig. 7.4 Follow the procedure to remove the door. Place the door on a soft and clean surface. With both hands hold the door and push the buttons on either side of the oven door (Fig. 7.4). One the top cap has been removed you will have access to the glass.
Troubleshooting DocNo.054-0001 - Troubleshooting BI oven Steam is coming from the oven. Oven temperature getting hotter as the cooker gets older. When cooking foods with a high water content (e.g. oven If turning the temperature down using the oven control knob chips) there may be some steam visible at the top of the door.
INSTALLATION Check the appliance is electrically safe when you have finished. 9. Installation DocNo.064-0003 - Installation - R6012 oven Dear Installer If your customer has a problem relating to your installation they will be able to contact you easily. Before you start your installation, please complete the details You must be aware of the following safety requirements &...
INSTALLATION Check the appliance is electrically safe when you have finished. Positioning the Oven Provision for Ventilation The oven can be installed under a worktop (Fig. 9.2) or at Failure to allow adequate ventilation to the appliance may high level in a tall kitchen unit and depending on the type of result in overheating or damage to adjacent units and could installation it is designed to fit into a standard 600 mm wide invalidate the guarantee.
Page 21
INSTALLATION Check the appliance is electrically safe when you have finished. Fig. 9.1 IMPORTANT If installing below an existing hob the gas connection must be on the right-hand side as shown in Fig. 9.1 from the rear of the hob. Right-hand Gas Connection Fig.
Page 22
INSTALLATION Check the appliance is electrically safe when you have finished. Fig. 9.3 Fig. 9.4 IMPORTANT IMPORTANT If installing the base panel leave a space as indicated in Stand away from louvers positioned below the control Fig. 9.4 to allow for air circulation. panel.
INSTALLATION Check the appliance is electrically safe when you have finished. Electrical Connection DOUBLE POLE SWITCHED Fig. 9.7 FUSE SPUR OUTLET This appliance must be installed by a qualified electrician to comply with the relevant Institution of Engineering and Technology (I.E.T.) regulations and also the local electricity supply company requirements.
0.5 cm. 105 mm These shims are only used when you notice the appliance is uneven in the cabinet and it is not lined up with Rangemaster built-in appliance. Check that the dimensions of the cabinet are correct for this appliance.
Oven (including front frame) Height 579 mm Width 548 mm Depth 550 mm Oven Data Brand Rangemaster Model identification RMB605BL/SS Type of oven Electric Mass 38.2 Number of cavities Single Cavity Efficiency Fuel type Electric Cavity type *Drop Down Door Multifunction*...
12. Warranty/After Sales Service DocNo.111-0003 Warranty No.10 If consultation or technical assistance is needed, please provide the local authorised service agent with the purchase invoice and the product code/serial number. The 2 years free maintenance for the operation of the appliance started from the date of purchase of this product.