Table of Contents
Advertisement
17 Baby monitor
You can use your phone as a baby
monitor. The handset can be set
as a baby unit. It sends an alert to
the parent unit (which can be an
additional handset or an external line)
if the sound level exceeds the set
limit.
Caution
•
Make sure the baby unit and the cord are
always out of reach of the baby.
•
Place the baby unit at least 1 meter/3 feet
but not more than 2 meters/6 feet away
from the baby.
Activate the baby unit
The baby unit can send alert to
the external line or to other M995
handsets registered on the same base.
External line can be a mobile phone
or another fixed line outside the
house.
Note
•
Make sure that any prefix digits and/or
country code are included when you send
an alert.
1-2m
Send to other handsets
1
Select [Menu].
2
Press
/
to select
[OK].
3
Select [On] > [Other handsets],
then press [OK] to confirm.
4
Select a handset, then press [OK]
to confirm.
Note
•
This feature is available only if you have two
or more M995 handsets registered on the
same base.
•
Make sure that the distance between the
baby unit and the parent unit is at least 1.5
meter away from each other to prevent the
howling effect.
Send to an external line
1
Select [Menu].
2
Press
/
to select
[OK].
3
Select [On] > [External line], then
press [OK] to confirm.
4
Enter a telephone number, then
press [OK] to confirm.
» The baby unit is activated
Send to a contact from the
phonebook
1
Select [Menu].
2
Press
/
to select
[OK].
3
Select [On] > [Select number], then
press [OK] to confirm.
4
Select a contact from the
phonebook, then press [OK] to
confirm.
, then press
, then press
, then press
EN
41
Advertisement
Table of Contents
