15 Alarm Clock; Set The Alarm; Turn Off The Alarm - Philips Monolith M9951 Extended User Documentation

15 Alarm clock

Your phone has a built-in alarm clock.
Check the information below to set
your alarm clock.

Set the alarm

1
Select [Menu].
2
Press / to select
[OK].
3
Select [On]/[Off], then press [OK]
to confirm.
4
Select [Alarm time], then press
[OK] to confirm.
5
Enter an alarm time, then press
[OK] to confirm.
6
Select [Repetition], then press
[OK] to confirm.
7
Select an alarm occurrence, then
press [OK] to confirm.
8
Select [Alarm tone], then press
[OK].
9
Select a tone from options, then
press [OK] to confirm.
» The alarm is set and
displayed on the screen of the
pre-registered handset and
base station.
Tip
•
Press to switch between [am]/[pm]
(country dependent).
36
EN
, then press
is

Turn off the alarm

Before the alarm rings
1
Select [Menu].
2
Press / to select
[OK].
3
Select [Off], then press [OK] to
confirm.
» The setting is saved.
When the alarm rings
• Press [Off] to turn off the alarm.
• Snooze the alarm by:
• Pressing [Snooze](or any key
except [Off]) on the handset;
• Touching the sensor on the
handset when the handset is
on the cradle.
» The alarm rings again after 5
minutes. After you snooze it for
3 times, the snooze function is
off.
Tip
•
If you do not snooze or switch off the alarm,
it will ring for 1 minute and enter the snooze
mode.
, then press