Belkin F5D7234-4 User Manual page 48

F5D7234-4 v4 Wireless G Router User Manual Rev1
Page 48 of 61
Please refer to the instructions provided by the publisher of your firewall
software for instructions on configuring the firewall to allow Internet access.
If you are still unable to access the Internet after disabling any firewall software,
please contact Belkin Technical Support.
Problem:
I can't connect to the Internet wirelessly.
Solution:
If you are unable to connect to the Internet from a wireless computer, please do
the following:
1. Look at the lights on your Router. Your Belkin Router's lights should be as
follows:
• The "Power" light should be on.
• The "Internet" light should be on.
• The "Modem" light should be either on or blinking.
2. Open your wireless utility software by clicking on the icon in the system tray
at the bottom, right-hand corner of the screen. If you are also using a Belkin
Wireless Card or Adapter with this Router, the tray icon should look like this:
3. The exact window that opens will vary depending on the model of wireless
card you have; however, any of the utilities should have a list of "Available
Networks"—those wireless networks it can connect to.
Does the name of your wireless network appear in the results?
Yes, my network name is listed—go to the troubleshooting solution titled "I can't
connect to the Internet wirelessly, but my network name is listed".
No, my network name is not listed—go to the troubleshooting solution titled "I
can't connect to the Internet wirelessly, and my network name is not listed".
Problem:
I can't connect to the Internet wirelessly, but my network name is listed.
Solution:
If the name of your network is listed in the "Available Networks" list, please
follow the steps below to connect wirelessly:
1. Click on the correct network name in the "Available Networks" list.
2. If the network has security (encryption) enabled, you will need to enter the
network key. For more information regarding security, see the section entitled
"Securing your Wi-Fi Network" in this User Manual.
3. Within a few seconds, the tray icon in the lower, left-hand corner of your
screen should turn green, indicating a successful connection to the network.