Belkin F5D7234-4 User Manual page 41

F5D7234-4 v4 Wireless G Router User Manual Rev1
Page 41 of 61
be notified. You can choose to download the new version or ignore it. The Router
ships with this feature enabled. If you want to disable it, select "Disable" and click
"Apply Changes".
Manually Configuring Network Settings
In order for your computer to properly communicate with your Router, you will
need to change your PC's TCP/IP settings to DHCP.
Manually Configuring Network Adapters in Windows 2000, NT, XP, or Vista
1. Click "Start", "Settings", then "Control Panel".
2. Double-click on the "Network and dial-up connections" icon (Windows 2000)
or the "Network" icon (Windows XP or Vista).
3. Right-click on the "Local Area Connection" associated with your network
adapter and select "Properties" from the drop-down menu.
4. In the "Local Area Connection Properties" window, click "Internet Protocol
(TCP/IP)" and click the "Properties" button. The following screen will appear:
5. If "Use the following IP address" (2) is selected, your Router will need to be
set up for a static IP connection type. Write the address information in the
table below. You will need to enter this information into the Router.
6. If not already selected, select "Obtain an IP address automatically" (1) and
"Obtain DNS server address automatically" (3). Click "OK".
Your network adapter(s) are now configured for use with the Router.
Manually Configuring Network Adapters in Windows 98SE or Me
1. Right-click on "My Network Neighborhood" and select "Properties" from the
drop-down menu.
2. Select "TCP/IP -> settings" for your installed network adapter. You will see the
following window.