Belkin F5D7234-4 User Manual page 43

F5D7234-4 v4 Wireless G Router User Manual Rev1
Page 43 of 61
Restart the computer. When the computer restarts, your network settings are
now configured for use with the Router.
Manually Configuring Network Adapters in Mac OS X
1. Click on the "System Preferences" icon.
2. Select "Network" from the "System Preferences" menu.
3. Select "Built-in Ethernet" (1) next to "Show" in the "Network" menu.
4. Select the "TCP/IP" tab (2). Next to "Configure:" (3), you should see
"Manually" or "Using DHCP". If you do not, check the PPPoE tab (4) to make
sure that "Connect using PPPoE" is NOT selected. If it is, you will need to
configure your Router for a PPPoE connection type using your user name
and password.
5. If "Manually" is selected, your Router will need to be set up for a static IP
connection type. Write the address information in the table below. You will
need to enter this information into the Router.
6. If not already selected, select "Using DHCP" next to "Configure:" (3), then
click "Apply Now".
Your network adapter(s) are now configured for use with the Router.
Recommended Web Browser Settings
In most cases, you will not need to make any changes to your web browser's
settings. If you are having trouble accessing the Internet or the Web-Based