Belkin F5D7234-4 User Manual page 10

F5D7234-4 v4 Wireless G Router User Manual Rev1
Page 10 of 61
Green
Solid Green
C. Router/Power Status
When you apply power to the Router or restart it, a short period of time elapses while the
Router boots up. During this time, the "router" icon blinks. When the Router has completely
booted up, the "router" icon becomes a solid light, indicating the Router is ready for use.
Off
Blinking Green
Solid Green
D. Wired-Computer Status
Off
Solid Green
Blinking Green
E. Wireless-Computer Status
Off
Solid Green
Blinking Green
F. Wireless Security
Off
Solid Green
Blinking
Green
G. Wi-Fi Protected Setup (WPS) button
This button is used
"Changing the Wireless Security Settings" section.
. Connection to Modem – Yellow
H
This port is for connection to your cable or DSL modem. Use the cable that was
provided with the Router to connect the modem to this port. Use of a cable
other than the cable supplied with the Router may not work properly.
Connections to Computers (Wired Computer Ports) – Gray
I.
Router is connected to modem and functioning properly
Router is off
Router is booting up
Router is on and ready
Wired computer is not present
Wired computer is connected to the Router
Data Transmission between the Router and wired computer(s)
Wireless computer is not present
Wireless computer is connected to the Router
Data Transmission between the Router and wireless computer(s)
Wireless security is off
Wireless security is on
WPS sync in progress
for the Wi-Fi Protected Setup feature. Please refer to the