Table 3-6 Wizard 4: Pptp Encapsulation; Wizard Setup: Screen 5; Wan Ip Address Assignment - ZyXEL Communications P-334W User Manual

Prestige 334W User's Guide
LABEL
ISP Parameters for Internet Access
Encapsulation
User Name
Password
Nailed-Up
Connection
Idle Timeout
PPTP Configuration
My IP Address
My IP Subnet
Mask
Server IP Address
Connection
ID/Name
Back
Next
3.6

Wizard Setup: Screen 5

The fifth wizard screen allows you to configure WAN IP address assignment, DNS server address
assignment and the WAN MAC address.
3.6.1

WAN IP Address Assignment

Every computer on the Internet must have a unique IP address. If your networks are isolated from the
Internet, for instance, only between your two branch offices, you can assign any IP addresses to the hosts
without problems. However, the Internet Assigned Numbers Authority (IANA) has reserved the following
three blocks of IP addresses specifically for private networks.
3-10

Table 3-6 Wizard 4: PPTP Encapsulation

Select PPTP from the drop-down list box.
Type the user name given to you by your ISP.
Type the password associated with the User Name above.
Select Nailed-Up Connection if you do not want the connection to time out.
Type the time in seconds that elapses before the router automatically disconnects
from the PPTP server. The default is 100 seconds.
Type the (static) IP address assigned to you by your ISP.
Type the subnet mask assigned to you by your ISP (if given).
Type the IP address of the PPTP server.
Enter the connection ID or connection name in this field. It must follow the "c:id" and
"n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your ISP.
Click Back to return to the previous screen.
Click Next to continue.
DESCRIPTION
Wizard Setup