Table of Contents
Advertisement
The following table describes the fields in this menu.
FIELD
The ESSID (Extended Service Set IDentity) identifies the AP to which the
wireless stations associate. Wireless stations associating to the AP must
ESSID
have the same ESSID. Enter a descriptive name of up to 32 printable 7-bit
ASCII characters.
Press [SPACE BAR] and select Yes to hide the ESSID in the outgoing data
Hide ESSID
frame so an intruder cannot obtain the ESSID through passive scanning.
Press [SPACE BAR] to select a channel. This allows you to set the
Channel ID
operating frequency/channel depending on your particular region.
RTS
Setting this attribute to zero turns on the RTS/CTS handshake. Enter a value
Threshold
between 0 and 2432.
Fragment
This is the maximum data fragment size that can be sent. Enter a value
Threshold
between 256 and 2432.
WEP
Select Disable to allow wireless stations to communicate with the access
points without any data encryption.
Menu 3 LAN Setup
Menu 3.5 - Wireless LAN Setup
ESSID= Wireless
Hide ESSID= No
Channel ID= CH06 2437MHz
RTS Threshold= 2432
Frag. Threshold= 2432
WEP Encryption= Disable
Default Key= N/A
Key1= N/A
Key2= N/A
Key3= N/A
Key4= N/A
Authen. Method= N/A
Edit MAC Address Filter= No
Edit Roaming Configuration= No
Preamble= Long
802.11 Mode= Mixed
Press ENTER to Confirm or ESC to Cancel:
Figure 23-6 Menu 3.5 Wireless LAN Setup
Table 23-4 Menu 3.5 Wireless LAN Setup
DESCRIPTION
Prestige 334W User's Guide
EXAMPLE
Wireless
No
CH06
2437MHz
2432
2432
Disable
23-7
Advertisement
Chapters
Table of Contents
