The Security Screen - ZyXEL Communications ZyXEL ZyAIR G-300 User Manual

Zyxel communications wireless lan pci adapter user's guide g-300

Hide thumbs Also See for ZyXEL ZyAIR G-300:

Table of Contents

LABAL

RTS Threshold

Data with its frame size larger than this value will perform the RTS/CTS handshake.

Setting this attribute to be larger than the maximum MSDU (MAC service data unit) size

turns off the RTS/CTS handshake. Setting this attribute to zero turns on the RTS/CTS

handshake.

Frag Threshold

The threshold (number of bytes) for the fragmentation boundary for directed messages.

It is the maximum data fragment size that can be sent.

Nitro Time

This is the time interval (in usec) between packet bursts. This allows your ZyAIR to

operate in a network with IEEE802.11b wireless LAN devices and still take advantage of

higher transmission rates with IEEE802.11g standard.

Click OK to save the settings.

Cancel

Click Cancel to discard all changes and close this screen.

2.3.2 The Security Screen

You can configure the ZyAIR to connect to a network with wireless security. In the Configuration screen,

select WEP Enable and click Edit. A Security screen displays as shown.

Field choices vary depending on what encryption method or authentication mode you select in this screen.

Refer to Section 2.2.1 and Section 2.2.3 for more information.

Using the ZyAIR Utility

Table 2-2 Configuration: Advanced

DESCRIPTION

ZyAIR G-300 User's Guide

2-13

Table of Contents