ZyXEL Communications G-360 Quick Start Manual

ZyXEL Communications G-360 Quick Start Manual

Hide thumbs Also See for G-360:

Advertisement

ZyXEL G-360
802.11g Wireless PCI Adapter
Quick Start Guide
Version 1.0
August 2004

Advertisement

Table of Contents
loading

Summary of Contents for ZyXEL Communications G-360

  • Page 1 ZyXEL G-360 802.11g Wireless PCI Adapter Quick Start Guide Version 1.0 August 2004...
  • Page 2: Important Note

    ZyXEL G-360 Quick Start Guide Important Note Federal Communications Commission (FCC) Interference Statement The 802.11g Wireless LAN Adapter has been tested to the FCC exposure requirements (Specific Absorption Rate). The equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment, under 47 CFR 2.1093 paragraph (d) (2).
  • Page 3: Hardware Installation

    3. Ground yourself by wearing an anti-static wrist strap or touching a metal object. Remove the computer cover and the ZyXEL G-360 from its packaging. 4. Insert the ZyXEL G-360 into an available PCI slot. Make sure the ZyXEL G- 360’s contacts are fully seated in the PCI slot.
  • Page 4: Windows 2000

    ZyXEL G-360 Quick Start Guide Windows 98 SE 1. When Windows automatically detects the ZyXEL G-360, click Next. 2. Select Search for the best driver for your device. (Recommended). and click Next. 3. Insert the Installation CD into your CD-ROM drive. Select Specify a location and click Browse to find the Driver folder in the CD.
  • Page 5 6. Click Finish to complete the driver installation. Windows XP 1. Windows automatically detects the ZyXEL G-360. Select Install from a list or specific location (Advanced), then click Next. 2. Insert the Installation CD into your CD-ROM drive. Select Search for the best drive in these locations then select only Search removable media.
  • Page 6 Click Next to accept the default file location or click Browse to select an alternate folder. Click Finish to restart the computer. After you insert the ZyXEL G-360 and install the driver and ZyXEL Utility, an icon appears in the system tray.
  • Page 7 ZyXEL G-360 Quick Start Guide If the ZyXEL Utility icon displays, the ZyXEL G-360 is installed properly. Refer to the User’s Guide to configure the ZyXEL G-360. LED Display PWR LED LINK LED The following table describes the LEDs on the ZyXEL G-360.
  • Page 8: Troubleshooting

    ZyXEL G-360 Quick Start Guide Troubleshooting PROBLEM CORRECTIVE ACTION Windows Make sure the ZyXEL G-360 is inserted into the computer PCI slot does not auto- properly and then restart your computer. Check the LEDs on the detect the ZyXEL G-360.

Table of Contents