Figure 5-9 Menu 11.5: Remote Node Filter (Ethernet); Figure 5-10 Menu 11.5: Remote Node Filter (Pppoe Or Pptp) - ZyXEL Communications 10 User Manual

Use menu 11.5 to specify the filter set(s) to apply to the incoming and outgoing traffic between this remote
node and the ZyWALL to prevent certain packets from triggering calls. You can specify up to four filter sets
separated by commas, for example, 1, 5, 9, 12, in each filter field. Note that spaces are accepted in this field.
Please refer to the Filters chapter for more information on defining the filters. With PPPoE and PPTP
encapsulations you also have the option of specifying remote node call filter sets.

Figure 5-10 Menu 11.5: Remote Node Filter (PPPoE or PPTP)

WAN and Dial Backup Setup
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Enter here to CONFIRM or ESC to CANCEL:

Figure 5-9 Menu 11.5: Remote Node Filter (Ethernet)

Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Call Filter Sets:
protocol filters=
device filters=
Enter here to CONFIRM or ESC to CANCEL:
ZyWALL 10~100 Series Internet Security Gateway
5-15