Zywall Rear Panel And Connections - ZyXEL Communications 10 User Manual

LED
DMZ
100M
WAN 10M Green
WAN
100M
AUX LNK Green
AUX ACT Green
CON/AUX
2.2

ZyWALL Rear Panel and Connections

The following figure shows the rear panels of the ZyWALL.
Hardware Installation
Table 2-1 LED Descriptions
COLOR STATUS
Orange Off
On
Flashing
Off
On
Flashing
Orange Off
On
Flashing
Off
On
Off
Flashing
Green Off
On
Orange Off
On
Flashing
ZyWALL 10~100 Series Internet Security Gateway
MEANING
The 100M DMZ is not connected.
The ZyWALL is connected to a 100Mbps DMZ.
The 100M DMZ is sending or receiving packets.
The 10M WAN link is not ready, or has failed.
The 10M WAN link is OK.
The 10M WAN link is sending or receiving packets.
The 100M WAN link is not ready, or has failed.
The 100M WAN link is OK.
The 100M WAN link is sending or receiving
packets.
The backup port is not connected.
The backup port is connected.
The auxiliary port is not sending or receiving
packets.
The auxiliary port is sending or receiving packets.
The CON/AUX link is not ready, or has failed.
The CON/AUX switch is set to CON and the
CON/AUX port is connected to a management
computer.
The CON/AUX link is not ready, or has failed.
The CON/AUX switch is set to AUX and the
CON/AUX port has an Internet connection through
a dial-up modem.
The CON/AUX switch is set to AUX and the
CON/AUX port is sending or receiving data through
a dial-up modem.
2-3