ZyWALL 10~100 Series Internet Security Gateway
FIELD
When you have completed this menu, press [ENTER] at the prompt "Press [ENTER] to confirm or [ESC]
to cancel" to save your configuration or press [ESC] to cancel and go back to the previous screen.
26.5 Applying an IP Policy
This section shows you where to apply the IP policies after you design them.
26.5.1 Ethernet IP Policies
From Menu 3 – Ethernet Setup, type 2 to go to Menu 3.2 – TCP/IP and DHCP Ethernet Setup.
You can choose up to four IP policy sets (from 12) by typing their numbers separated by commas, for
example, 2, 4, 7, 9.
Press Space Bar to Toggle.
Figure 26-6 Menu 3.2: TCP/IP and DHCP Ethernet Setup
26-6
Table 26-2 IP Routing Policy
Menu 3.2 - TCP/IP and DHCP Ethernet Setup
DHCP= Server
Configuration:
Client IP Pool Starting Address= 192.168.1.33
Size of Client IP Pool= 32
Primary DNS Server= 0.0.0.0
Secondary DNS Server= 0.0.0.0
DHCP Server Address= N/A
TCP/IP Setup:
IP Address= 192.168.1.1
IP Subnet Mask= 255.255.255.0
RIP Direction= Both
Version= RIP-1
Multicast= None
Edit IP Alias= No
IP Policies= 2,4,7,9
Press ENTER to Confirm or ESC to Cancel:
DESCRIPTION
Type IP Policy
sets, separated
by commas.
IP Policy Routing