Figure 22-2 Ftp Session Example; Table 22-2 General Commands For Gui-Based Ftp Clients - ZyXEL Communications 10 User Manual

ZyWALL 10~100 Series Internet Security Gateway
22.2.4 GUI-based FTP Clients
The following table describes some of the commands that you may see in GUI-based FTP clients.

Table 22-2 General Commands for GUI-based FTP Clients

COMMAND
Host Address
Login Type
Transfer Type
Initial Remote Directory
Initial Local Directory
22.2.5 File Maintenance Over WAN
TFTP, FTP and Telnet over the WAN will not work when:
22-4
331 Enter PASS command
Password:
230 Logged in
ftp> bin
200 Type I OK
ftp> get rom-0 zyxel.rom
200 Port command okay
150 Opening data connection for STOR ras
226 File received OK
ftp: 16384 bytes sent in 1.10Seconds
297.89Kbytes/sec.
ftp> quit

Figure 22-2 FTP Session Example

Enter the address of the host server.
Anonymous.
This is when a user I.D. and password is automatically supplied to the
server for anonymous access. Anonymous logins will work only if your ISP
or service administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer files in either ASCII (plain text format) or in binary mode.
Specify the default remote directory (path).
Specify the default local directory (path).
DESCRIPTION
Firmware and Configuration File Maintenance