Table of Contents
Advertisement
Installer Menus
Use the Installer's Menus to make TV operation adjustments.
Accessing the Installer's Menu
Installer's menus can be accessed by using the optional
installer's remote control. Just press and hold MENU (about
8 seconds) until the display changes, then press 9, 8, 7, 6,
then ENTER. To exit the Installer's Menu, press ENTER
again. Changes you make will be stored in nonvolatile
memory.
The Installer's Menu opens with item 00-I, INST. SEQ. Use
the SELECT key to sequence through the available menu
items. Or, access an item directly by entering the line
number, then pressing MENU. For example, to access the
Start Channel option which is on line 11, press 11, then
MENU. To change a current setting use the Left/Right ADJ
keys.
Using the Installer's Menu
Items 00-90 are immediately accessible only upon entering
the Installer's Menu. Their numbers, descriptions, ranges,
factory default settings, and a place for listing any changes
made on-site are given below. A second section of the
Installer's Menu that is intended for qualified service
technicians only is not shown (XX-F Items). Normally these
items do not require adjustment.
Items in the Installer's Menu: 0-I to 25-I
Menu Item
Function
0-I.
INSTALLER. SEQ
1-I.
POWER MANAGE
2-I.
AC ON
3-I.
BAND/AFC
4-I.
STRT CHANNEL
5-I.
CHAN LOCK
6-I.
GHOST CH
7-I.
START VOLUME
8-I.
MIN VOLUME
9-I.
MAX VOLUME
10-I.
MUTE DISABLE
11-I.
KEY DEFEAT
12-I.
IR BANKS EN.
13-I.
SCAN MODE
14-I.
STRT CH IN SM
15-I.
SLEEP TIMER
16-I.
EN. TIMER
17-I.
ALARM
18-I.
RADIO
19-I.
NOT USED
20-I.
FEATURE LEVEL
21-I.
V-CHIP
22-I.
MAX BLK HRS
23-I.
CAPTION LOCK
24-I.
TEXT MODE
25-I.
FUNCTION PRE.0
Value Range
Default Value
0 - 3
0
0 - 7
0
0 / 1
0
0 - 7
0
0 - 255
255
0 / 1
0
0 / 1
0
0 - 63, 255
255
0 - 63
0
0 - 63
63
0 / 1
0
0 / 1
1
0 / 1
0
0 - 3
1
0 / 1
0
0 / 1
1
0 / 1
1
0 / 1
1
0 / 1
1
0 / 1
1 Zen 1
0 / 1
1
0 - 99
12
0 / 1
0
0 / 1
1
0 - 3
0
OIMCRMIO62A 01.48
00-I.
SN:XXXX-XXXXXXXX
UPN:XXX-XXX-XXX-XXX
XX/XX/XX
XX-F Menu Items (Not shown
here) are service-type
adjustments and only qualified
technicians having specialized
test equipment should access
them.
Brief Description of Function and Comments
Changes installer Entry Sequece. Leave default set 0
0 ( 9876), 1 (4321), 2 (1478), 3 (3698)
Sets number of hours of no activity before auto shutoff.
Set to 1 to enable auto turn on at power up.
Tuning band, see detailed descriptions.
Channel at turn-on (255 last Ch).
When set to 1, cannot tune from current channel.
Set to 1 to enable Ghost Channel display.
Volume level at TV turn-on (Set 255 to r etain last volume level).
Minimum volume setting.
Maximum volume setting.
Set to 1 to disable m ute function.
Set to 1 to disable M enu, Select, and Adj keys on front panel.
Set to 1: enables TV to respond to IR codes to change Channel Bank directly.
Typically used for Hospitals: puts On-Off and FM in Ch Up/Down sequen ce.
Set to 1 to put TV on/o ff below start channel number.
Set to 1 to enable Sleep Timer.
Set to 1 to enable Timer.
Set to 1 to enable Alarm.
Set to 1 for TVs with Radio.
Leave default set 1 (1 Zen 1)
Set to 1 to enable V-Chip
Select number of Parental Control blocking hours.
Set to 1 to retain caption setting at turn off.
Set to 1 to add Text option to closed caption menu.
Controls channel preview in Pay-Per-View function menu.
01
INST . SEQ.
0
TE = 10110000
Page 31
Advertisement
Table of Contents
