TP-Link PW-AN401 User Manual page 82

PW-AN401/PW-AN401D 150M Wireless N Access Point User Guide
Now, try to log on to the Web-based configuration page again after the above settings have
been configured. If you still cannot access the configuration page, please restore your Access
Point's factory default settings and reconfigure your Access Point following the instructions of
this QIG. Please feel free to contact our Technical Support if the problem persists.
Note:
While the reconfiguration is done, you need to change the IP address settings as below. Then,
with the correct hardware connection, you can surf the Internet successfully.
77