Table of Contents
Advertisement
PW-AN401/PW-AN401D
4) Bridge with AP
Disable Security - Check this box radio button to disable wireless security. If disabled, the
wireless stations will be able to connect this device without encryption. It is strongly
recommended that you choose one of the security types to enable security.
WPA/WPA2-Personal(Recommended) - Select WPA/WPA2 based on Radius Server.
•
Version - You can select one of following versions.
Automatic(Recommended) - Select WPA-Personal or WPA2-Personal automatically
1)
based on the wireless station's capability and request.
WPA-Personal - Wi-Fi Protected Access.
2)
WPA2-Personal - WPA version 2.
3)
•
Encryption - You can select either Automatic, TKIP or AES.
•
Radius Server IP - Enter the IP address of the Radius Server.
•
Radius Port - Enter the port used by radius service.
•
Radius Password - Enter the password for the Radius Server.
Figure 4-18 Wireless Security – Bridge with AP
150M Wireless N Access Point User Guide
46
Advertisement
Table of Contents
