Table of Contents
Advertisement
PW-AN401/PW-AN401D
Note:
If the above screen does not prompt, it means that your web-browser has been set to a proxy.
Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that
appears, cancel the Using Proxy checkbox, and click OK to finish it.
2.
After successfully logging in, the Quick Setup page will display. Click Next to continue.
3.
The
Operation
PW-AN401/PW-AN401D supports up to five operation modes.
In Access Point mode, the product will act as a wireless central hub for your wireless
LAN clients, giving a wireless extension for your current wired network.
In Multi-SSID mode, the product can be assigned up to four SSIDs to work with your
VLAN.
In Repeater(Range Extender) mode, the product can extend the coverage of another
wireless Access Point or Router. The universal repeater mode is for the wireless Access
Point or Router which does not support WDS function.
In Bridge with AP mode, the product can wirelessly connect two or more remote LANs
together.
Figure 3-9 Quick Setup
Mode
page
will
appear
Figure 3-10 Operation Mode
150M Wireless N Access Point User Guide
then,
shown
11
in
Figure
3-10.
The
Advertisement
Table of Contents
