Table of Contents
Advertisement
PW-AN401/PW-AN401D
II. By PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One: Enter the PIN into my AP
Step 1: Keep the default WPS Status as Enabled and click the Add device button in Figure 4-5,
then the following screen will appear.
Step 2: Choose "Enter the new device's PIN" and enter the PIN code （take 38334702 for
example） of the wireless adapter in the field after PIN as shown in the figure above. Then
click Connect.
Note:
The PIN code of the adapter is always displayed on the WPS configuration screen as shown in the
following figure.
Step 3: For the configuration of the wireless adapter, please choose "Enter the PIN of this
device into my access point or wireless router." in the configuration utility of the WPS
as below, and click Connect.
The WPS Configuration Screen of Wireless Adapter
Figure 4-7 Enter the PIN
150M Wireless N Access Point User Guide
27
Advertisement
Table of Contents
