Kyocera TASKalfa 307ci Operation Manual page 384

Troubleshooting > Troubleshooting
Message
Removable memory
error.
Removable Memory is
*1
full.
Remove originals in
document processor.
Replace all originals and
press [Continue].
Replace MK.
Running security
function...
*1 When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses. For details
on Auto Error Clear, refer to the following:
Auto Error Clear (page 8-42)
Checkpoints
Is writing to a removable memory
prohibited?
―
―
Are there any originals left in the
document processor?
—
—
—
10-27
Corrective Actions
An error occurred in the removable
memory. The job stopped. Select
[End].
The possible error codes and their
descriptions are as follows.
01: Connect a removable memory
that can be written to.
An error occurred in the removable
memory. The job stopped. Select
[End].
The possible error codes and their
descriptions are as follows.
01: The amount of data that can be
saved at once has been exceeded.
Turn the power OFF/ON. If the error
still occurs, the removable memory
is not compatible with the machine.
Use the removable memory
formatted by this machine. If the
removable memory cannot be
formatted, it is damaged. Connect a
compatible removable memory.
Job is canceled. Select [End].
Insufficient free space in the
removable memory. Delete
unnecessary files.
Remove originals from the
document processor.
Remove originals from the
document processor, put them back
in their original order, and place
them again. Select [Continue] to
resume printing. Select [Cancel] to
cancel the job.
Replacement of the parts in the
maintenance kit is necessary at
every 200,000 pages of printing and
requires professional servicing.
Contact your Service
Representative.
Running security function. Please
wait.
Reference
Page
―
―
―
―
—
—
—