Table of Contents
Advertisement
GenICam parameters
BalanceRatio_R_Preset3
BalanceRatio_Gr_Preset3
BalanceRatio_B_Preset3
BalanceRatio_Gb_Preset3
OFF
The white balance with BalanceRatio_X_Once (X: R, Gr, B or Gb)
If the white balance process is not necessary, please sets 0 for BalanceRatio_X_Once (X: R, Gr, B or Gb)
White balance "OFF" setting procedure
1. Sets Off at BalanceWhiteAuto.
Auto white balance
The optimized white balance gain calculates each frame for the auto white balance.
Auto white balance setting procedure
1. Sets Continuous at BalanceWhiteAuto.
Push to set white balance
The white balance gain adjusts once after select this white balance then set to Balance_X_Once (X: R, Gr, B or Gb)
Sets OFF at BalanceWhiteAuto automatically after set Balance_X_Once.
Push to set white balance setting procedure
1. Sets the flat white target.
2. Sets Once at BalanceWhiteAuto.
STC-SCA503POE / STC-SBA503POE
Product Specifications and User's Guide
For more information please contact Aegis Electronic Group, Inc. *(888)687-6877 *aegis-g2@aegiselect.com *http://www.aegiselect.com
Integer type
R white balance gain for preset3.
Default: 0
Integer type
Gr white balance gain for preset3.
Default: 0
Integer type
B white balance gain for preset3.
Default: 0
Integer type
Gb white balance gain for preset3.
Default: 0
No.13S094-05
42/59
Advertisement
Table of Contents
