Master Section - Yamaha MM1242 Operation Manual

Master Section

7
PHANTOM
+6
+4
+2
0
–2
6
–4
–7
–10
5
–15
–20
L R
OUTPUT LEVEL
AUX SEND 1 AUX SEND 2
4
0 10 0
L
3
0 10 0
R
0 10 0
AUX RETURN 1 AUX RETURN 2
2
PFL PFL
10
5
0
5
10
15
20
30
40
00
L ST
1
4
MIXER
POWER
POWER
+6
ON
+4
+2
OFF
0
–2
–4
–7
–10
–15
–20
AUX 3 AUX 4
PHONES
MONITOR LEVEL
10 0 10 0 10
L L L
10 0 10 0 10
R R R
10 0 10 0 10
AUX RETURN 3 AUX RETURN 4
PFL PFL
10 10 10
5 5 5
0 0 0
5 5 5
10 10 10
15 15 15
20 20 20
30 30 30
40 40 40
00 00 00
R 3 AUX SEND 4
D
1 ST faders
The stereo master faders independently adjust the level of
the left and right channel main stereo buss signals
appearing at the STEREO OUT connectors.
The OUTPUT LEVEL L, R meters allow you to monitor
the L and R outputs.
2 ST PFL switches
Turning this switch ON sends the pre-fader ST L and R
8
signals to the MONITOR OUT and PHONES.
3 AUX RETURN controls
These controls adjust the level of the L and R signals that
9
are received at the rear-panel ST AUX RTNs 1–4. (Use a
stereo-type phone plug connector for ST AUX RTN 1–4.)
After this controls, the signals are sent to the L and R
stereo bus (STEREO OUT). Therefore, you can use the
ST AUX RTN as auxiliary inputs, as well as effects
returns.
0
ST AUX RTN
1∼4 –10dB
A
B
4 AUX SEND controls
These adjust the overall output level appearing at AUX
SEND1 and 2.
5 OUTPUT LEVEL AUX 3, 4 meters
C
These meters show the level of output signal appearing at
the AUX SEND 3 and 4.
6 OUTPUT LEVEL L, R meters
These meters show the level of output signal appearing at
the STEREO OUT connector.
7 PHANTOM indicator
The PHANTOM indicator LED lights when the Phantom
power is ON.
8 POWER indicator
The POWER indicator LED lights when the power is ON.
9 POWER switch
Flip up to turn the power ON.
It is a rule that first you turn off the power to the devices (a
power amplifier, in many cases) closest to the speakers
before turning off the power to the console.
STEREO
L R
INV
L
INV
R