Startup Mode (Ix1600 / Ix1500) - Fujitsu ScanSnap iX1400 Basic Operation Manual

Startup Mode (iX1600 / iX1500)

The action that the ScanSnap takes when the ADF paper chute (cover) is opened and the ScanSnap
is turned on depends on the start up mode setting of the ScanSnap.
The ScanSnap has two startup modes as described below.
l Fast
You can start scanning immediately. The ScanSnap enters sleep mode (standby mode) when
the ADF paper chute (cover) is closed.
l Normal
The ScanSnap is turned on. The ScanSnap is turned off when the ADF paper chute (cover) is
closed.
The procedure to change the setting for the startup mode of the ScanSnap is as follows:
1.
Press in the
display the [Settings] screen.
2.
Press
3.
Press [Startup Mode] to display the [Startup Mode] screen.
4.
Change the setting.
5.
Press to return to the home screen.
home screen on the touch panel of the ScanSnap to
to display the [Scanner settings] screen.
98
Turning the ScanSnap On or Off