Fujitsu ScanSnap iX1400 Basic Operation Manual page 23

2. Open the ADF paper chute (cover) to turn the power on.
Example: iX1600
3. Configure the settings of the ScanSnap by following the instructions on the touch panel.
When you are using iX1400, proceed to
Set the display language of the touch panel, the startup mode, and a device that is used with the
ScanSnap.
When the [USB Connection] screen is displayed on the touch panel, the setting procedure for the
ScanSnap is complete.
ADF Paper Chute (Cover)
2 Downloading the
23
Setting Up iX1600 / iX1500 / iX1400
Software.