Scanning Documents (Ix100) - Fujitsu ScanSnap iX1400 Basic Operation Manual

Scanning Documents (iX100)

The procedure for scanning documents by inserting one document at a time is as follows.
For details about documents that can be scanned, refer to
1.
Open the feed guide of the ScanSnap.
HINT
l If you want the document to be ejected from the front of the ScanSnap or when there is not
enough space where the document exits the ScanSnap, open the output guide.
For details about documents that can be scanned with the output guide open, refer to
"Documents to Scan (iX100)" (page
l How the document is ejected differs as below depending on whether the output guide is open
or closed.
- When the output guide is closed
- When the output guide is open
a The [Scan/Stop] button flashes in blue. The button returns to being lit normally when
document scanning is enabled.
Feed Guide
241).
Output Guide
245
Scanning Documents with iX100
"Documents to Scan (iX100)" (page 241).