Changing The Frequency For Connecting The Scansnap (Ix1600 / Ix1500) - Fujitsu ScanSnap iX1400 Basic Operation Manual

Changing the Frequency for Connecting the ScanSnap (iX1600 /
iX1500)
Change the setting of the frequency for connecting the ScanSnap which is used when the scanner is
connected to a wireless access point.
HINT
In some regions, a 5 GHz wireless LAN cannot be used.
If you are using the ScanSnap in the region where a 5 GHz wireless LAN cannot be used, you cannot
change the frequency for the connection.
1.
Press in the
display the [Settings] screen.
2.
Press
3.
Press [Access point connection] to display the [Access point connection]
screen.
4.
Press [Frequency for the Connection] to change the frequency for the
connection.
5.
Press to return to the home screen.
home screen on the touch panel of the ScanSnap to
to display the [Wi-Fi settings] screen.
Changing the Wireless LAN Connection Method (iX1600 / iX1500)
159