Table of Contents
Advertisement
1. Icemaker
Icemaker Water
Minimum Icemaker
Supply Inlet
Water Supply Line Size
1/2" Female Pipe
1/4" Nominal ID
Thread (FPT)
Copper Water Tubing or
Equivalent
• An icemaker water supply line shut-off valve and drain valve must be installed.
• Be sure there is sufficient extra water supply line and drain line for the appliance to be
pulled out for service.
Icemaker
Water Supply
Inlet
1/2" FPT
Icemaker
Drain Outlet
3/4" FPT
Vent Tube
Bin Drain Outlet
3/4" FPT
Minimum 3/4" Nominal ID
Hard Pipe or Equivalent
Fig. 7
Air-Cooled and Remote Models
Model Shown:
KMD-530MAH
Icemaker Drain
Outlet
3/4" Female Pipe
Thread (FPT)
Minimum 1/4" Nominal ID Copper
Water Tubing or Equivalent
Icemaker
Ice
Storage
Bin
17
Minimum Icemaker
Drain Line Size
3/4" Nominal
ID Hard Pipe or
Equivalent
Shut-Off Valve
Drain Valve
Be sure there is sufficient
extra water supply line and
drain line for the appliance
to be pulled out for service.
Separate piping to
approved drain. Leave a
two-inch (5 cm) vertical air
gap between the end of
each pipe and the drain.
2-inch (5-cm) air gap
Floor Drain
Advertisement
Table of Contents
