The Operation Tone - Panasonic RR-XR320 Operating Instructions Manual

Play
ªChecking the remaining play time
Press [MODE] during play.
Press again to return to
HQ
the previous display.
Remaining play time
ªScanning the files: Intro-scan
This plays the first five seconds of all the
files in a folder in order.
While stopped, press and hold [SELECT,
ENTER] for about two seconds.
When you find the file you want to play,
press [SELECT, ENTER]. The file is played
through to the end.
16
Changing the play speed
There are three play speeds. The speed is factory set to
normal.
PLAYBACK SPEED
SLOW NOR FAST
Slow Fast

The operation tone

The tone is factory set to on, but you can
turn it off.
1To select
P u s h
up or
down
2To confirm
selection
Press
This example shows how to turn the tone off.
1
Press [MODE].
You can now select a mode.
2
1 Within 10 seconds
Push [SELECT, ENTER] up or
down so "BEEP SET"flashes.
2 Within 10 seconds
Press [SELECT, ENTER].
3
1 Within 10 seconds
Push [SELECT, ENTER] up or
down so "BEEP > OFF?"
flashes.
2 Within 10 seconds
Press [SELECT, ENTER].
"BEEP = OFF SET" is displayed.
ªTo turn the tone on
Select "BEEP > ON?" in step3, 1 and press [SELECT,
ENTER].
17