Recording - Panasonic RR-XR320 Operating Instructions Manual

Recording

Files are kept in folders. The unit creates
four folders when a new card is used and
you can create another five for a maximum
of nine ('page 21). Each folder can hold
up to 99 files.
Plug-in power microphone jack
Recording B u i l t - i n
indicator microphone
$ REC REC % P A U S E P A U S E
STOP ST OP
10
Preparation
Select the recording quality ('page 11)
1
Press [FOLDER] to select a
folder to record into.
The folder changes with each press.
The initial four folders are titled: 1 MEMO, 2 MEETING,
3 TO DO, 4 PRIVATE. You can change the titles
('page 25).
2 Press [REC, PAUSE] to start
recording.
The recording indicator lights and
sound is recorded through the
built-in microphone.
Recording level meter
3
Press [STOP] to stop recording.
The file information is shown in the
following order.
Folder number
(File title and recording
HQ
time)
Folder title
(Recording date and
time)
File number
R e c o r d i n g
(Folder and file title)
quality
HQ
Files are given titles automatically, but you
can change them ('page 25).
Recording time
ªTo pause recording
Press and hold [REC, PAUSE] until the
recording indicator starts flashing.
Press to resume recording.
ªRecording quality
The total recording time depends on the recording quality
you select. HQ (high quality) is factory setting and provides
the best sound quality.
Approximate recording times on the included 16 MB SD Memory Card
HQ
HQ mode SP mode
30 min. 60 min.
ªTo change the quality (' illustration on page 9)
This example shows how to set quality to HQ.
HQ 1
Press [MODE].
2
1 Within 10 seconds
Push [SELECT, ENTER] up or
down so "QUALITY" flashes.
2 Within 10 seconds
HQ
Press [SELECT, ENTER].
3
1 Within 10 seconds
Push [SELECT, ENTER] up or
down to select a mode.
2 Within 10 seconds
Press [SELECT, ENTER].
"HQ MODE SET" is displayed.
LP mode
150 min.
HQ SP LP
11