Titling folders and files
Titling folders and files
Enter titles of up to 32 characters. Write
over the current title.
1To select
P u s h
up or
down
2To confirm
selection
Press
STOP
26
1
Press [MODE].
You can now select a mode.
2
1 Within 10 seconds
Push [SELECT, ENTER] up or
down so "EDIT TITLE"flashes.
2 Within 10 seconds
Press [SELECT, ENTER].
3
When titling a folder
1 Push [SELECT, ENTER] up or
down so "FOLDER?" flashes.
2 Press [SELECT, ENTER].
When titling a files
1 Push [SELECT, ENTER] up or
down so "FILE?" flashes.
2 Press [SELECT, ENTER].
4
1 When "GO EDIT" is displayed,
push [SELECT, ENTER] up or
down to select the position where
you want to start entering the title.
2 Press [SELECT, ENTER].
The characters you
can enter appear
below the title.
5
Enter the characters ('page 28).
6
Press and hold [SELECT, ENTER] for
one second.
"EXIT EDIT" is displayed.
7
Press [SELECT, ENTER].
The normal display is restored.
ªIf the normal display appears before you finish
Start again from step 1.
ªTo cancel partway through
Press [STOP].
Note
The unit's display can show eight characters at one time. Titles
longer than this scroll across the screen when you select the
folder or file.
27