Sony HBD-E385 Service Manual page 24

HBD-E385/E390/T39
6. Diag (Audio Input Test)
This screen performs audio input test.
Screen 1: Select Audio Input Test Category
Operation:
[<]/[,] Selects the category
[m]/[ ] Activate the selected category
[RETURN] Returns to the service top menu
Screen 2: Select Input Device
After "Audio Input Test" selects in Screen 1, the device to test is
chosen.
Operation:
[M]/[m] Selects Device
[ ] Activate and Start Test/Stop
[RETURN] Returns to the selection of test category
• Device Test : Device List
Digital Input1 : CXD90008 is inputted from ARC
Digital Input2 : CXD90008 is inputted from Optical
Analog Input : CXD90008 is inputted from AUDIO
• Audio Input Test
CXD90008 is inputted from DIR/analog and outputs LineOut
(8ch) L and R.
Check tone sound by speaker connected with LineOut (8ch) L and
R.
(Input; LPCM 48kHz 2ch)
Diag
Audio Input Test
Category:
Diag
Category: Audio Input Test
Device:
Digital Input 1
Digital Input 2
Analog Input
[ENT] Start Input Sound
(Screen 1)
HELP: [LEFT] [RIGHT] [UP] [DOWN] [ENT] [RET]
(Screen 2)
[ ]
Diag
Category: Audio Input Test
Device:
Digital Input 1
Digital Input 2
Analog Input
[ENT] Stop Input Sound
HELP: [LEFT] [RIGHT] [UP] [DOWN] [ENT] [RET]
7. Diag (Wireless LAN Test)
This screen performs wireless LAN test.
Note: This mode doesn't operate correctly. Never use this mode. Refer to
"CHECKING METHOD OF NETWORK OPERATION" on page
10 when you confi rm the wireless LAN operation.
24
8. Diag (MIC Input Test)
This screen performs MIC input test.
Note: Not used for the servicing.
9. Diag (HDMI Input Test)
This screen performs HDMI input test.
Note: Not used for the servicing.
10. Diag (Transcoder Test)
Note: Not used for the servicing.
11. Log: Error Log (Output of each Log)
This screen displays the contents of each log.
Note: Do not refer to the displayed date.
Screen 1: Selects log
Operation:
[1]/[ ]
[RETURN] Returns to the top menu of the service mode
Screen 2: Displays the Error Log
Operation:
[
<
[
,
[RETURN] Returns to the screen (Screen 1) that selects the log
[RED]
•
Error Log:
About copying log to USB memory device:
Press the [RED] button in each log display screen with the USB
memory device inserted into the unit.
Note: Please do not press the [RED] button immediately after USB mem-
Error Log:
[ ]
(Screen 1)
Moves to the Error Log output screen
] Returns to the previous page
] Moves to the next page
type
Writes the log contents to an USB memory device
Viewing the log display
[174] 2010/01/01 00:00:08: [ErrCode:0902A4053002]
[Index number] [Date] [Time] [Error code]
ory is inserted.
Please do not pull out USB memory immediately after the [RED]
button was pressed.
When "getErrLogFile.trm fi le" exists in the USB memory de-
vice, errlog.log fi le is output.
Select Log
[1] Error Log
Error Log
02]
[174] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[175] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[176] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[177] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[178] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[179] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
HELP : [DOWN][ENT][(NUM)]
[180] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[181] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[182] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[183] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[184] 2010/01/01 00:00:07 [ErrCode:0902A4053002]
[185] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
[186] 2010/01/01 00:00:08 [ErrCode:0902A4053002]
HELP : Press [RED] key to store log to Udisc.
(Screen 2)
<Page 1/20>