Sony HBD-E385 Service Manual page 65

Pin No. Pin Name
J5 NO_USE
J6 AVDD33_3
J7 NO_USE
J8 NO_USE
J9 DVCC33_IO
J10 NO_USE
J11 DVCC33_IO
J12 NO_USE
J13 NO_USE
J14 NO_USE
J15 NO_USE
J16 NO_USE
J17 NO_USE
J18 NO_USE
J19 NO_USE
J20 DDRVCCIO
J21 NO_USE
J22 DGND12_K
J23 RDQ5
J24 RDQ7
J25 NO_USE
K1 NO_USE
K2 NO_USE
K3 FEOSCEN
K4 NO_USE
K5 AVDD12_1
K6 NO_USE
K7 AGND33_2
K8 DVCC33_IO
K9 DVCC12_K
K10 NO_USE
K11 DVCC12_K
K12 DVCC12_K
K13 NO_USE
K14 NO_USE
K15 DVCC12_K
K16 NO_USE
K17 DVCC12_K
K18 DVCC12_K
K19 DDRVCCIO
K20 NO_USE
K21 DGND12_K
K22 RDQ4
K23 RDQ6
K24 NO_USE
K25 NO_USE
L1 FEGAINSW3
L2 FEGAINSW1
L3 FECMOD
L4 FECFREQ
L5 DGND12_K
L6 DGND12_K
I/O
- Not used
- 3.3 V Power Pin
- Not used
- Not used
- 3.3 V digital IO power
- Not used
- 3.3 V digital IO power
- Not used
- Not used
- Not used
- Not used
- Not used
- Not used
- Not used
- Not used
- 1.5 V digital IO power
- Not used
- Digital ground
I/O Memory data bit 5
I/O Memory data bit 7
- Not used
- Not used
- Not used
High frequency modulation enable signal output, or LDD serial interface CLK or I2C SCL.
I/O
The pin is spike-free at power-on stage.
- Not used
- 1.2 V Power Pin
- Not used
- Analog Ground
- 3.3 V digital IO power
- 1.2V digital power
- Not used
- 1.2V digital power
- 1.2V digital power
- Not used
- Not used
- 1.2V digital power
- Not used
- 1.2V digital power
- 1.2V digital power
- 1.5 V digital IO power
- Not used
- Digital ground
I/O Memory data bit 4
I/O Memory data bit 6
- Not used
- Not used
O Read gain switch 3.
O Read gain switch 1.
High frequency modulation mode selection signal output, or LDD serial interface command
I/O enable.
The pin is spike-free at power-on stage.
Frequency selection signal output, or LDD serial interface data or I2C SDA.
I/O
The pin is spike-free at power-on stage.
- Digital ground
- Digital ground
HBD-E385/E390/T39
Description
65