Shooting enhanced images
Use the profile control switch to switch to profile control photography.
You can choose image enhancement options on the profile control screen.
• Profile control photography is available only when the mode dial is rotated to P, A, S, M,
B
or
.
2
• Some functions such as multiple exposures cannot be used with this function.
• If [RAW] is currently selected for image quality, image quality will automatically be set to
RAW+JPEG.
• Touch controls can also be used.
Shooting enhanced monochrome pictures
You can apply a color filter effect to monochrome pictures (Color Filter Effect), change
the amount of peripheral light (Shading), and adjust bright and dark areas of the picture
(Highlight&Shadow Control).
1
Rotate the profile control switch to
COLOR/MONO.
• The profile control screen will be displayed.
2
Choose a profile using FG and choose
one from [Mono1] to [Mono4] using HI.
• You can use the rear dials to select
[Mono1/2/3/4].
• The following are presets for [Mono1] to
[Mono4].
Mono1 Monochrome Profile 1
Mono2 Monochrome Profile 2
Mono3 Monochrome Profile 3
Mono4 Monochrome Profile 4
46 EN
(Monochrome Profile Control)
Profile
A standard "Monochrome" preset with all settings reset
to their default values (±0)
A preset that produces the effect of black-and-white
film
A preset that produces the effect of infrared black-
and-white film
A preset that reduces the contrast to make your
photo look soft
(Profile Control)
MONO
MONO
1
1
Monochrome Profile 1
MONO
MONO
MONO
MONO
MONO
MONO
MONO
MONO
COLOR
COLOR
COLOR
COLOR
COLOR
COLOR
1
1
2
2
3
3
4
4
1
1
2
2
3
3
COLOR
COLOR
4
4