Controlling Exposure (Exposure F); Selecting The Af Target Mode (Af Area) - Olympus Pen E-P7 Instruction Manual

Controlling exposure
The exposure selected automatically by the camera can be altered to suit your artistic
intent. Choose positive values to make pictures brighter, negative values to make them
darker. Exposure compensation can be adjusted by up to ±5.0 EV.
Negative (–)
1
Rotate the front dial to adjust exposure
compensation.
• Exposure compensation is not available in B, M,
panorama is selected in Z mode.
• The live view shows the effects of values not exceeding ±3.0 EV. If the exposure exceeds
±3.0 EV, the exposure bar will begin flashing.
• Movies can be corrected in a range up to ±3.0 EV.
Selecting the AF target mode
The frame showing the location of the focus point is referred to as the "AF target". You
can change the size of the AF target. You can also select Face priority AF (P. 82).
1
Press the N (H) button to display the AF target.
2
Select [I (Single Target)] or [J (9-Target Group)] using the front dial.
o
o All Targets
I Single Target
J 9-Target Group
• The single target mode is automatically applied in movie shooting if the group target mode
is set.
No compensation (0)
i i
i i
The camera automatically chooses from the full set of focus
targets.
You can choose a single AF target.
The camera automatically chooses from the targets in the selected
nine-target group.
(Exposure F)
Positive (+)
B
, or SCN mode or when Live Time or
i i
2
(AF Area)
EN 81