Letting The Camera Choose Aperture And Shutter Speed (Program Mode) - Olympus Pen E-P7 Instruction Manual

Letting the camera choose aperture and shutter speed
The camera chooses the optimal aperture and shutter speed according to subject
brightness.
1
Rotate the mode dial to P.
2
Focus and check the display.
• The shutter speed and aperture chosen by the camera
are displayed.
3
Take pictures.
• You can use the front dial to select exposure compensation.
• You can use the rear dial to select program shift.
• The shutter speed and aperture value displays will blink if the camera is unable to achieve
correct exposure.
The aperture value at the moment when its indication blinks varies with the lens type and
focal length of the lens.
When using a fixed [ISO] setting, change the setting. g "Changing ISO sensitivity
(ISO)" (P. 83)
Warning display
example (blinking)
60" F2.8 60" F2.8
4000 4000
F22 F22
Status
The subject is too
dark.
The subject is too
bright.
(Program mode)
S-IS ON S-IS ON
P
Shutter speed
Shooting mode
Action
Use the flash.
• The metered range of the camera is
exceeded. A commercially available ND
filter (for adjusting the amount of light) is
required.
• Take pictures in silent mode. g "The
Electronic Shutter (Silent s)" (P. 88)
ISO-A
200
L F
4K
30p
1:02:03
0.0
250 F5.6 250
1023
Aperture
EN
2
35