Letting The Camera Choose Aperture And Shutter Speed (P Program Mode); Program Shift - Olympus PEN-F Instruction Manual

Letting the camera choose aperture and shutter speed
(P program mode)
P mode is a shooting mode where the camera automatically sets the optimal aperture
and shutter speed according to subject brightness. Set the mode dial to P.
2
• The shutter speed and aperture selected by the camera are displayed.
• You can use the exposure compensation dial to select exposure compensation.
• Use the front or rear dial for program shift.
• The shutter speed and aperture displays will blink if the camera is unable to achieve
correct exposure.
Warning display
example (blinking)
60" 60" F2.8 F2.8
8000 F22 8000
• The aperture value at the moment when its indication blinks varies with the lens type and
focal length of the lens.
• When using a fi xed [ISO] setting, change the setting. g [ISO] (P. 45 )

Program shift (%)

In mode P, you can choose different combinations of
aperture value and shutter speed without altering exposure.
"s" is displayed next to the shooting mode when the front
or rear dial is rotated to enable program shift. To cancel
program shift, rotate the dial until "s" is no longer displayed.
• Program shift is not available when a fl ash is used.
26 EN
Status
The subject is too
dark.
The subject is too
F22
bright.
Wi-Fi
ISO-A
200
P 250 F5.6 250
Aperture value
Shutter speed
Shooting mode
Action
• Use the fl ash.
• The metered range of the camera is
exceeded. A commercially available ND
fi lter (for adjusting the amount of light) is
required.
Wi-Fi
ISO-A
200
P
250 F5.6 250
s
Program shift
S-IS AUTO
L
N
FHD F
60
P
01:02:03 01:02:03
38 38
S-IS AUTO S-IS AUTO
L
N
FHD F
60
P
01:02:03 01:02:03
38 38