Letting The Camera Choose Aperture And Shutter Speed (Program Mode) - Olympus E-M10 Mark IV Instruction Manual

Letting the camera choose aperture and shutter speed
(Program mode)
The camera chooses the optimal aperture and shutter speed according to subject
brightness.
Rotate the mode dial to P.
1
2
2
Focus and check the display.
• The shutter speed and aperture chosen by the camera
are displayed.
3
Take pictures.
• You can use the front dial to select exposure compensation.
• You can use the rear dial to select program shift.
• The shutter speed and aperture value displays will blink if the camera is unable to achieve
correct exposure.
The aperture value at the moment when its indication blinks varies with the lens type and
focal length of the lens.
When using a fixed [ISO] setting, change the setting. g "Changing ISO sensitivity
(ISO)" (P. 74)
Warning display
example (blinking)
60" F2.8
4000
%
• You can choose the functions performed by the front and rear dials. g [Dial Function]
(P. 132)
• You can choose whether the display reflects the effects of exposure compensation or
maintains a constant brightness for ease of viewing. At default settings, the effects of
exposure settings are visible in the display. g [Live View Boost] (P. 133)
54 EN
Status
The subject is too
dark.
The subject is too
F22
bright.
S-IS ON S-IS ON
P
Shutter speed
Shooting mode
Action
Use the flash.
• The metered range of the camera is
exceeded. A commercially available ND
filter (for adjusting the amount of light) is
required.
• Take pictures in silent mode. g "The
Electronic Shutter (Silent s)" (P. 78)
ISO-A
200
L
F
4K
30p
1:02:03
250 F5.6 250 0.0
1023
Aperture