Table of Contents
Advertisement
Installation instructions
terminal block opening.
4. Remove center terminal block screw.
6
5. Remove ground wire (green with yellow
stripes) from external ground connector
screw and remove from center terminal
block.
6. Connect ground (green) wire of cord to
external ground conductor screw.
7. Connect neutral (white) wire of cord under
center screw of terminal block.
8. Connect the other wires to outer screws.
9. Tighten the strain relief screws.
10.Replace terminal box cover on back of dryer.
11.Plug dryer into wall receptacle.
12.Turn power on at breaker/fuse box.
4
7
8
Customer Care Center
1-800-898-1879
www.askona.com
27
Advertisement
Table of Contents
